Concrete steps construction in Hayward CA - even steps set on solid support
Cracked, sinking or uneven front steps? We build new concrete steps that rest on solid support and line up with your door and walk.
Concrete steps construction in Hayward starts with laying out the whole rise, the full height from your walk to the door, then forming and pouring. Steps can sit on the ground, tie into a landing or the house's foundation, or span between supports, and that decides the steel and footing they need. Most people call us when old steps have cracked or sunk unevenly.
Price moves with the number of steps, the total rise, whether old concrete has to come out and what the new steps will rest on. The schedule turns mostly on permits and curing, the wait while fresh concrete gains strength. My written estimate spells out the support, the steel and how the steps tie into your landing or house, and we look into the permit side early so it doesn't hold the job up.
What goes into building your concrete steps
- Layout before forming. I lay out the whole rise before we build a single form, so the top step meets your door at the right height and the bottom one meets the walk evenly.
- Support and steel. We pack a firm base or pour a footing under the steps and tie in rebar, the steel that holds them together, because loose fill settles and the steps go with it.
- Our own crew, on site. Our own crew forms, pours and finishes every set of steps, and I'm on site to run the work. We've been in business since 2013.
- Licensed in California, fully insured. We're licensed and fully insured. That matters, because California lets an unlicensed worker take only jobs within its $1,000 limit that need no permit and no hired help.
What goes wrong with steps
| Problem | What it looks like | Usual fix |
|---|---|---|
| A settled step | What it looks like: One step drops lower than the rest and catches toes | Usual fix: Repair it soon or rebuild on solid support |
| Cracked treads | What it looks like: Cracks running across the steps that keep getting wider | Usual fix: Patch small cracks, rebuild if the base moved |
| Gap at the house | What it looks like: A gap opening between the top step and the wall | Usual fix: Rebuild tied into the landing or foundation |
| Chipped edges | What it looks like: Broken corners and crumbling front edges on each step | Usual fix: Rebuild and protect the edges while curing |
Fix the steps or start over
- Repair one step. Suits steps that are sound overall but have one settled or chipped step, because fixing it soon takes care of a trip hazard before it grows.
- New steps, same landing. Works when the landing at your door is solid and level, so we break out the old steps and pour new ones tied into it.
- Steps and landing together. Best when the landing has cracked or sunk too, so we rebuild both with the same base work we use in slab foundation building.
How your steps job runs
- Call or send the form. Call (510) 264-7026 or send the form, and we'll set a time for me to come out and look.
- I walk the site. I measure the rise, check what the steps will rest on, then write an estimate spelling out the prep, the steel and the joints that steer cracks.
- We sort out permits. We handle the permit side. For steps at the public sidewalk, Hayward's review usually takes five to ten business days, or fifteen with traffic control.
- Form, pour and finish. Our crew forms and pours, then brooms the treads before they harden so they grip wet shoes, and cures every face while protecting the corners.
- Final walk-through. I walk the finished steps with you and go over when you can start using them, and our crew leaves the site clean.
Keeping your steps sound for years
Steps stay sound because of what's under them and the steel inside, and both are set before we pour. If a budget gets tight, I'd cut a fancy finish before I'd cut the base, because you can redo a surface but not what's under it. After that, keep downspouts and sprinklers from soaking the ground at the bottom step.
We build steps for homeowners, rental owners and small commercial lots in Hayward and many of the cities around it on both sides of the bay, including San Leandro and Fremont. If your entry is due for new steps, call or send the form for a free estimate.
Tell us about your steps
Send the number of steps, the total rise and a few photos of the entry, and we'll get back to you within one business day to set a visit.
(510) 264-7026- Free, no-obligation estimate
- Measured on site
- Support and steel in writing
Questions about concrete steps
Should I choose poured or precast concrete steps for my house?
Poured steps cost more than precast because of the labor to build forms, but they're the better pick when your rise isn't a standard precast size or the steps tie into an existing slab. At the estimate, I'll measure your rise and tell you which one fits.
How long do concrete steps last?
One pricing guide puts properly reinforced steps on an adequate footing at 30 to 50 years, with little upkeep beyond resealing now and then. That lifespan rests on the steel and the footing, so ask any contractor how they'll build both. You'll find ours written into the estimate.
Do I need a permit if my new steps meet the sidewalk in Hayward?
Yes, if the work reaches the public sidewalk or street, Hayward requires an Encroachment Permit, either Minor or Major depending on the area, length and scope of the work. Questions about building projects go to the city's Permit Center at (510) 583-4005, and we look into your address early.
How long does new concrete take to reach full strength?
Concrete cured on site typically takes 7 to 28 days to reach full strength, so any later work that depends on the steps may have to wait. You can usually walk on them well before then, and I'll tell you when at the walk-through.